Resetting And Full Resetting; Reset; Reset Method; Full Reset - Denso BHT-1361QWB-CE Hardware User Manual

BHT-1300-CE Series

2.6 Resetting and Full Resetting

2.6.1

Reset

Reset the BHT in the following cases.
 The BHT does not respond to an entry from the touch screen or keys.
 Programs in

2.6.2 Reset Method

With t he BHT power ON, press th
same time. Then release all these keys.
 Note 
2.

6.3 Full Reset

Full reset is required if the problem persists even af
2.6.4 Ful l Reset Method
With the BHT power ON, press the full reset key combination
(M1 + M2 + Left Trigger + Power) for more than 1 sec.
Then release all these keys.
 Caution 
22
the BHT malfunction for some unknown reason.
e reset key combination (M1 + Right Trigger + Power) at the
Data stored in files is retained e
currently being edited will be lost.
All data including files and settings stored in the RAM will be lost and the RAM will
revert to the factory default if the BHT is full reset. It is recommended to back up the
data to the "FLASH" folder or to the computer before performing a full reset. The BHT
starts from the "Initial Setup" when the BHT turns ON after the data in the RAM is
deleted.
ven if the BHT is reset. However, unsaved data
ter resetting.