Turning Off The Power; Normal Power Off; Turning The Power Off After Registry Back-Up - Denso BHT-1260BWB-CE User Manual

BHT-1200 Series

2.5 Turning OFF the Power

Use one of the following three methods to turn OFF the BHT.

Normal power OFF

Turning the power OFF after registry backup
Auto power OFF
− Point −
The power does not turn OFF for 10 seconds once the power turns ON.
2.5.1 Normal Power OFF
Press the power key.
The BHT power turns OFF after the screen on the right is displayed.
− Point −
Do not remove the battery while the message on the
right is displayed.
Failure to follow instruction may result in a loss of
the data stored in the BHT.

2.5.2 Turning the Power OFF after Registry Back-up

Hold down the SF key and press the power key for 3 seconds or
more.
The message on the right is displayed and registry backup begins.
The power turns OFF automatically when the backup is completed.
− Point −
Do not remove the battery while the message on the
right is displayed. Failure to follow instruction may result
in data stored in the BHT being lost.
The Registry is an area in which settings information required for
BHT operation is recorded.
The OS restores the registry automatically if it is lost.
The error message on the right is displayed if the OS fails to restore
the registry (because the registry has not been backed up).
Refer to Chapter 4, 4.4.3 System Properties -[3] File System
for details of how to restore the registry default.
22
→ Press the power key.
→ Hold down the SF key and press the power key for 3
seconds or more.
→ The power turns OFF automatically when the BHT is not
used for a specified length of time.