Hard Test Menu - Denso BHT-1260BWB-CE User Manual

4.9 Hard Test Menu

4.9.1 HardTest Menu
The "HardTest" menu is used to perform the following hardware tests for
the BHT. To open the HardTest menu, tap "4:Test" in the System Menu.
[1] SCANNER:
[2] BEEPER :
[3] AGING:
[4] COM:
[5] DISPLAY:
[6] KEY VIBRATION:
 Note 
Contact your sales dealer if an error occurs during the
above tests.
[1] Code Scanning Test
BHT-1200B Series
Tap the "1: SCANNER" button in the HardTest menu to perform a code
scanning test. The screen shown on the right is displayed.
Scan an actual code with the BHT, and confirm that the scanned data
matches with the data shown on the screen.
When a code is scanned, the LED indicator illuminates in blue, and the
beeper sounds once.
The scanned code type, number of digits and scanned data are displayed
in the screen.
The code type and number of digits are displayed in the order shown
below.
Code Mark TYPE1 ( Code Mark TYPE2 ) number of digits
The scanned codes are displayed as characters.
The characters displayed on the screen vary depending on the code
types as shown in the table on the next page.
Read Parameter: Opens the scanner reading parameter menu. (refer to
"4.8 Scanner Reading Parameter")
Barcode Handy Terminal/2D code Handy Terminal
Performs a barcode scanning test.
Performs a beeper scale test.
Performs an aging test.
Performs a communication test.
Performs an LCD and indicator LED test.
Performs a key entry and vibrator test.
Hand Held Terminal
Barcode Handy Terminal

Code Mark (Type1)
Code Mark (Type2)
number of digits
scanned data
171