Exit The Wwan Manager; Automatic Power Restore; Error Message - Denso BHT-1260BWB-CE User Manual

4.7.8 Exit the WWAN Manager

The WWAN Manager is still running in the background after the main window is closed.
To display the WWAN Manager again or exit the WWAN Manager,
select: "Show" or "Exit" in the contextual menu shown by holding down
the WWAN Manager icon in the Windows task bar.
Double tapping the "Wireless WAN" icon in the System Properties is another way to redisplay the WWAN
Manager.

4.7.9 Automatic Power Restore

The 3G module stays in power saving mode even after the BHT goes into suspend mode by turning the
power off.
However, the 3G module will be forcibly powered off when either one of the following events occurs.
- The battery cover is opened.
- The battery voltage is dropped below the level of proper startup.
After the forcible shutdown, the 3G module power automatically restores when the BHT is turned on.
The following message will appear if the WWAN manager is activated after the automatic power restore of
the 3G module.
Data connection will not resume on automatic power restore.
Reconnect to the network manually after confirming that the BHT is in the 3G service area either by
tapping the "Connect" button in the "General" tab or by using the application.

4.7.10 Error Message

Error Message
Data connection is not configured.
The connection name is invalid.
Correct it.
The connection name already exists.
Change it.
Data Connection has been terminated. Retry
the connection.
RasDial Error XXX
Insert SIM card.
PIN1 is a 4 to 8 digits code.
PUK1 is an 8 digits code.
PIN1 is incorrect.
PUK1 is incorrect.
Barcode Handy Terminal/2D code Handy Terminal
Configure the settings in the "DataConnection" tab
menu.
The connection name must be alphanumeric with at
least one character.
The following symbols cannot be used for the
connection name.
| > < ? * \ / :
The connection name entered already exists.
Change the connection name.
Data Connection has been terminated.
Restart the data communication
Refer to the link below for the error code details.
http://support.microsoft.com/kb/163111/en-us
Insert SIM card.
Enter a 4 to 8 digits code for PIN1.
Enter an 8 digits code for PUK1.
Enter the correct PIN1.
Enter the correct PUK1.
Hand Held Terminal
Barcode Handy Terminal
Solution
163