[22] SQRC (Only for BHT-1200Q)
"SQRC" is a setting tool called the "SQRC setting menu" which is used to
perform SQRC scanning.
To open the SQRC setting menu, double tap the SQRC icon in the
System Properties.
Refer to SQRC Setting User's Manual for details.
The following is an explanation of all the advanced system menus that are not in the system menu.
[23] Resetting the Backup Battery Discharge Counter
The backup battery discharge counter can be reset in the advanced
system menu.
Reset the backup battery discharge counter after replacing the backup
battery.
To reset the backup battery discharge counter, follow the steps below.
1. Open the System Properties menu.
2. Hold down the SHIFT key and press the "0" key.
The "Backup Battery" screen shown on the right is displayed.
3. Tap the "Reset" button.
The battery backup discharge count is reset to zero (0).
Note
The counter can only be reset after the discharge count
reaches 200.
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
117