Turning Off The Power; Normal Power Off; Turning The Power Off After Registry Back-Up - Denso BHT-1361QWB-CE Hardware User Manual

2.5 Turning OFF the Power

U se one of the foll owing three methods t
Normal pow er OFF
Turning the power OFF after registry b
Auto po er OFF w
 Note 
The power do

2.5.1 Normal Power OFF

Press the power key.
The BHT power turns OFF after the screen on the right is displayed.
 Caution 

2.5.2 Turning the Power OFF after Registry Back-up

Hold d own the SF key and press
The message on the right is displayed and registry backup begins.
The power turns OFF automatically when the back
 Caution 
The Registry is an area in which settings information required for
BHT operation is recorded.
The OS restores the registry automatically if it is lost.
The error message on the right is displayed if the OS fails to restore
the Registry (because the Registry has not been backed up).
Refer to "6.4 System Properties" in the User's Manual (Software)
for details of how to return the Registry to its default status.
o turn OFF the BHT.
ackup
es not turn OFF for 10 seconds once the power turns ON.
Do not remove the battery while the message on the
right is displayed. Failure to follow instruction m
in data stored in the BHT being lost.
the power key for 3 seconds or more.
Do not remove the battery while th
right is displayed. Failure to fol
in data stored in the BHT being lost.
Barcode / 2D Code Handy Terminal
 Pr
ess the power key.
 Hold down the
SF key and press the power key for 3
seconds or more.
 The power turns
OFF automatically when the BHT is not
used for a specified length of time.
ay result
up is completed.
e mes sage on the
low instruction may result
21