Turning Off The Power; Normal Power Off; Turning The Power Off After Data Back-Up; Auto Power Off - Denso BHT-1306BWB User Manual

BHT-1300B Series

2.6 Turning OFF the Power

Use one of the following three methods to turn OFF the BHT power.
Methods

1) Normal power OFF

2) Turning the power
OFF after data backup

3) Auto power OFF

2.6.1 Normal Power OFF
1.
Press the Power key ( ).
The BHT power turns OFF after the screen on the right is displayed.
Do not remove the battery cartridge while the
 Point 
message on the right is displayed.
When the power is next turned ON, there are times
when a message (2XXX ) appears asking the user
to contact the administrator.

2.6.2 Turning the Power OFF after Data Back-up

1.
Hold down the Power key (
The message right is displayed and data back-up is commenced.
The power turns OFF automatically when the back-up is complete.
Do not remove the battery cartridge while the
 Point 
message on the right is displayed.
The back-up process may take several tens of
seconds depending on the amount of data.
2.6.3 Auto Power OFF
The power turns OFF automatically when the BHT is not used for the length of time set at the user
program.
The default time is set to 3 minutes when the BHT is shipped from the factory.
* Refer to "BHT-1300 Programmer's Manual" for details of auto power OFF.
24
Operation
Press the Power key.
Hold down the Power key for at least 3
seconds.
The power turns OFF itself when the BHT is
not used for the specified period of time set.
) for at least 3 seconds.
Data Backup Timing
After 20 minutes from turning off
When the power turns off
After 20 minutes from turning off