Table of Contents
Advertisement
System Components
Display
Displays are ordered separately.
Computer
192 to 384 Mbytes of RAM are required to run Philips Information Center software
Memory
applications.
Hard Drive
The M3154 Database Server has 3 hard drives, each with a capacity of at least 18.2 Gbytes,
which is sufficient for monitoring data for 96 patients from 4 Information Centers. Additional
disk drives are required for added capabilities (when more than 4 Information Centers and
more than 96 patients are desired - see "Purchased Options" on page 1-43).
Monitoring
A 10BaseT/100BaseTX Ethernet network adapter is provided for connection of the IntelliVue
LAN
Information Center to an Ethernet LAN or for connecting a Printer via a Printer Hub (e.g.
Printer Hub permits up to 4 Local Database Information Centers to use a single HP LaserJet
printer). It also allows the Information Center or Database Server connection to a Clinical
Network switch. The Network connection is via UTP Category 5 cable with a speed of 100
Mbit/s.
Hospital LAN
A second 10BaseT/100BaseTX Ethernet network adapter card (2nd NIC) is provided for
Card
systems that require a second NIC card for connection to the Hospital LAN (e.g. Large
Network/Web Access, HL7 Interface). This card interconnects the device to the hospital's
internet. The Network connection also uses UTP Category 5 cable and has a speed of 100
Mbit/s.
SDN/Recorder
The processing unit also includes an SDN/Recorder Interface Card to provide the interface
Interface Card
between signals on the SDN and the computer's central processing unit and for
communication to and from the Philips 2-Channel Recorder.
Audio Card
The processing unit has an audio card for powering an external speaker to annunciate audio
and Speaker
alarms. The external speaker should be located where it can be heard by clinicians.
CD ROM Drive
The Server processing unit includes a standard Compact Disk (CD) drive for installing
Windows Operating System and Philips application software.
Floppy Disk
The Server processing unit also includes a standard floppy disk drive that accepts standard 3
Drive
1/2" diskettes. It is intended for software installation and archiving clinical and system
configuration settings and Service Log information.
Video Card
For dual display installations, another video card may be required. This is installed in the
factory if the dual display option is a purchased option, but must be installed by a Philips
customer engineer if an upgrade option. The Dual Display Upgrade Installation Note
provided with the option describes the installation procedure. Installation of a dual display
card in a single display system is not allowed.
2-4
Hardware Description
Advertisement
Table of Contents
Troubleshooting
