Configuration; System Configuration - Philips M3150B Installation And Service Manual

The Service Menu contains the following applications:
•
•
•
•
•
•
Each heading has a menu of application options, as shown in Figure 1-15 for Configuration.
Clicking on the heading name displays the menu. Items with an arrow (>) to the right have
sub menus.
Note The Read Only Config Wizard application in the Configuration menu permits viewing of
network and device settings while all devices are in monitoring mode, but settings cannot
be changed.

Configuration

Configuration of the Information Center system hardware and software (including the
Network and many of the Network device parameters) is accomplished through a variety of
configuration windows. Configuration is facilitated by a Config Wizard, which
automatically sequences through the configuration windows in the required order. The Config
Wizard is automatically initiated during installation of software, but it can also be accessed
directly from the Configuration menu. See Figure 1-15.
Warning When the !Config Wizard runs on the Database Server, all Information Centers and Clients on
the Network will reboot and go into local database mode and no patient data will be stored by
the Server.
Warning Service Menu items with an exclamation point (!) preceding them only run when the
Information Center or Client is in non-monitoring mode, during which no patient monitoring
can occur.
The following types of configurations - system, unit wide, and patient specific - and software
aids are described below.
System
Configuration applications for system components and applications are accessed from the
Configuration Configuration menu of the Service function of Information Center software. Most of these
configurations are made during initial software installation using the Config Wizard
applications.
Support Logs that provide information on the operational history and condition of
Philips devices and networks.
Diagnostics tools to help diagnose and troubleshoot Philips system problems for both
Philips and Window applications.
Configuration applications for configuring the network and devices connected to it.
Other Services that provide Windows configuration tools and remote access capability
Shutdown for the controlled shutdown of Philips application software and access to the
Windows Main Menu.
Maintenance applications for troubleshooting the network and the connected devices.
Introducing the IntelliVue Information Center System
Features
1-25