Demo Mode Installation Procedure; Overview - Philips M3150B Installation And Service Manual

Information center system
Table of Contents

Advertisement

Demo Mode Installation Procedure

Overview

Notes
Installing Windows
Operating System
This appendix describes the procedure for installing the Demonstration Mode
software of IntelliVue Information Center Release. The Demo Mode uses the
software along with simulator patient data files. It is intended for use in
training users on IntelliVue Information Center Release E.01 applications and
permitting them to gain experience in manipulating and reviewing typical
patient information. The installation of the IntelliVue information Center
Application Software will copy these patient simulator files (only when
requested to do so during installation "Yes" - factory default setting is "No")
to the hard drive, and also create a Run Demo Icon in the Windows screen.
The Host Name must be set to Demo for Demo Mode to work properly.
Demo Mode software is contained on the IntelliVue Information Center
Release E.01 Application Software CD-ROM, which is provided with
IntelliVue Information Center shipments.
When the Demo Mode program is being used for training on the customer's
systems you must reinstall the OS and then the Application Software
before monitoring patients.
During the installation of the IntelliVue Information Center Release E.01
Application Software you will be asked "Do you want to install DEMO
MODE and simulator patient files?" Selecting Yes will install the Demo
Mode and simulator files. The factory default is set to No.
Demo Mode software requires a PC workstation with a Windows XP operating
system. This can be installed using the Release E.01 Operating System CD-
ROM and Field Install Support Tool (FIST) floppy disk, which comes with
IntelliVue Information Center systems. For installation instructions for a
workstation, refer to Chapter 7.
Step 1. Install the Operating System on a PC workstation following
procedures given in Chapter 7. Make sure the Host Name is set to
Demo or the Demo Mode will not work properly.
BIOS Floppy
Operating System Installation
FIST Disk
Demo Mode Installation Procedure
Software
Software
Application Software & WIndows XP
Operating System
CD-ROMs
F
F-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3170M3155bM3151bIntellivue seriesM3169aM3154b

Table of Contents