View Audit Data; Export Audit Data; Test And Inspection - Philips M3150B Installation And Service Manual

Step 2. View and modify (if necessary) the Clinical Unit to Clinician assignments.
View Audit Data The View Audit Data feature allows clinicians with administrative privileges to view an audit
trail of all clinical operations. The administrator can perform specific searches based on the
criteria entered in the search boxes.
Step 1. Click on the VIEW AUDIT DATA link.
Step 2. (Optional) Type specific search criteria in the search boxes.
Step 3. Click on the View Audit Data button.
The Audit trail stores approximately 100,000 entries. When that level is reached, the entries
are deleted using a First In, First Out (FIFO) approach.
Export Audit Audit Data can also be exported. The export file is an .xml file that is named with the date
Data corresponding to the date with which is was exported. Audit files can only be exported to
paths located on the Master Database Server.
Step 1. Click on the EXPORT AUDIT DATA link.
Step 2. Enter in the Export Path (e.g. A:\).
Step 3. Click on the Export Data button.
Test and
After all of the configuration settings have been made, proper operation of the Information
Inspection
Center Web should be tested to verify that patient data can be accessed. The following
procedure describes how to test the system. It is recommended that this test be run from a PC
on the hospital's intranet; but it can also be run from the Database Server.
Step 1. Test LAN connectivity of the NIC by pinging its IP Address from a PC on the
hospital's intranet or the Database Server as follows:
– open the Command Prompt window by one of the following:
— from Windows Main Menu: Start / Programs / Accessories /
Command Prompt
— from Service Menu: Diagnostics /!MS DOS Command Prompt.
– Type ping hostname, where hostname is the computer name of the device with
the 2nd NIC Card given in the Installing the Web NIC Card procedure.
Web Installation on the Database Server
Procedure
B-9