Data Export - Installation On The Database Server; Overview - Philips M3150B Installation And Service Manual

Data Export - Installation on the

Overview

Appendix E describes the procedure for installing and activating the Data Export
options:
• Holter option - this feature provides the ability to export a patient's ECG
waveform data stored on the Database Server to a Philips/Zymed Holter
Scanner for Windows - Model 2010 for Holter analysis via the hospital's
Network.
• 12-Lead option - this feature provides the ability to export
captured conventional 12-lead ECG to a configured receiving system
Data Export requires the following conditions:
• Philips Application Software Release E.01 installed on the Database Server
and all Information Centers and Clients on the Network.
• The Holter Export and/or 12-Lead Export must be purchased and the
interface configured on the Information Center to recognize the hospital's
receiving system.
• The hospital's Holter System must be the Philips/Zymed Holter Scanner for
Windows - Model 2010 running Software Version 2.0 or higher on a
Windows 98, ME or 2000 PC. The hospital's Holter PC must also be enabled
to receive the exported patient data from the Information Center/Database
server - refer to the procedures for your specific operating system described at
the end of this section.
• The hospital's TraceMaster Server must be the running software version
A.04 with Option 40. The TraceMaster Server must also be enabled to receive
the exported patient data from the Information Center/Database server - refer
to the procedures described at the end of this section.
• A second Network Interface Card (NIC) must be installed.
• A 100 Mbit/s network connection must be made between the Database
Server's NIC and the hospital's LAN.
• The hospital must provide the following configuration information for the
Database Server:
– IP Address
– IP Subnet Mask
– Default Gateway
– Host Name(s)
• TCP/IP and HTTP networking protocol on hospital LAN PC's accessing the
Database Server
• Configuration of Host Name of the Holter System PC (configured via the
Config Wizard)
• Configuration of Host Name of the TraceMaster server (configured via the
Config Wizard)
Data Export - Installation on the Database Server E-1
Database Server
12-Lead ECG
E