Table of Contents
Advertisement
transmits, and manages the flow of data among patient monitors and central stations
connected to the SDN.
Note
M2350/60A CCMs (release B.03.13) that monitor telemetry with release 2.x cannot connect
to the same Philips Communications Controller (PCC) as the Information Center systems
(release C.0 and later). This unsupported configuration will cause loss of all telemetry
patients being monitored, and Standby and ECG size control will be unavailable at the
Information Center.
Note
Each CareNet switch can accommodate a total of 24 patient monitors per PCC (hardwired
and telemetry) and 6 central monitors.
Central
The M3150 Information Center is used for monitoring data from all types of patient
Monitoring
monitors (CareNet connected and Network connected). The Information Center can
Stations
monitor and display patient data for up to 16 patients.
The M3155 Information Center is used for monitoring data from all types of patient
monitors (CareNet connected and Network connected). Patient monitoring data are
transmitted via the Network to the Server where they are stored. The Information Center
can monitor and display patient data for up to 16 patients.
Review Station
M3151 Information Clients connected to a Database Server can be used to review real-
time and stored monitoring data for any patient connected to the Network. The Client can
also display monitoring data for up to 16 patients. Clients can only be used on Networks
with a Database Server.
Documentation
M3170 Patient Link provides a central location for bedside recordings and reports
Station
initiated from SDN hardwired bedsides, M2/3/4 bedsides and IntelliVue Patient Monitors
for up to 16 patients. In addition, the Patient Link provides support for bed to bed overview
and alarm reflection for M3/4 bedsides and IntelliVue Patient Monitors. Patient Link
cannot be used with Telemetry bedsides.
Database Server
The M3154 Database Server provides database storage of patient monitoring data for the
Patient Care Network. Patient monitoring data from all Information Centers on the Network
are received and stored by the Database Server. Up to 96 hours of patient data and 150
events for up to 128 active patients plus 32 transfer patients can be stored. Any
Information Center or Client on the Network can overview real-time monitoring data from
any other Information Center on the Network and access any patient's data stored in the
Database Server.
Small Database
The M3169 Small Database Server provides database storage of patient monitoring data
Server
for the Patient Care Network. Patient monitoring data from all Information Centers on the
Network are received and stored by the Database Server. Up to 48 hours of patient data
and 150 events for up to 48 active patients plus 12 transfer patients can be stored. Any
Information Center or Client on the Network can overview real-time monitoring data from
any other Information Center on the Network and access any patient's data stored in the
Database Server.
Network Design
Site Planning and Preparation
4-9
Advertisement
Table of Contents
Troubleshooting
