Configuration
Note that a Read Only Config Wizard option provides Read-Only versions of the
Configuration windows so that configuration settings can be viewed without forcing all
Information Centers and Clients to go into local database mode.
When the !Config Wizard is accessed from this menu, the following
Warning
Clicking Yes will cause all Information Centers and Clients on the Network to reboot
and go into local database mode, after which the Config Wizard will begin. This process
takes about a 3-5 minutes to complete.
6-10
Software Installation & Configuration
– Date & Time Setup
– Archive
– Report Configuration
– Report/Recording Destination
– Print Configuration
Figure 6-6 Database Server Configuration Menu
Warning
appears.