Interconnecting the System
LC2000
Touch Display
The touch display has the following procedures that must be done at installation time.
Note
When touch screens are used in Dual Display configuration, use of one stylus and holder for
only the right display may be prefered.
Cable
The rear panel of the touch display has three connections: one for the Power cord, one for
Connections
the Video cable (see Touch Display Stylus and Holder Mount), and one for the USB Cable
(see Figure 5-26). When the connections have been made, the cables can be thread through
the mounting stand.
5-24
Hardware Installation
Power Supply
AC Power Input
Figure 5-25 LC2000 Plug Connections
Figure 5-26 Touch Display Panel Connections
Power
USB Cable
Video Cable
NetRAID 1MCard
2nd LAN Card for
Hospital LAN (Optional)
Modem Card (US & Canada)
Video Display
LAN Connection
Keyboard
Mouse
(UPS) Serial Port - IOIOI