Table of Contents
Advertisement
Step 12. Click Next> and the Installing PIC Software window opens.
Step 13. Click Next> to begin the installation.
Step 14. When the software process is complete, the Config Wizard begins and sequences
Note
If restoring, all settings will be restored using the Archive disk created before the OS
installation. The only setting that must be manually configured is the Patient Data Transfer
Bandwidth Utilization. See "Patient Data Transfer - Bandwidth Utilization" on page 7-75.
through the required configuration windows for the device. See "Configuration" on
page 6-9.
Maintenance, Troubleshooting, and Repair
Troubleshooting
7-155
Advertisement
Table of Contents
Troubleshooting
