Troubleshooting
HP P2478W or
Step 1. Properly shutdown and restart the Server. During bootup, press F2 to enter Setup.
P2878U LC2000:
Step 2. Select Yes and press Enter to display the Phoenix BIOS System Configuration
Step 3. Select Configuration System folder. using the keyboard right arrow key.
Step 4. Select the Configuration System folder. Tab to the Configuration Menu items
7-126
Maintenance, Troubleshooting, and Repair
Press the keyboard F9 key to open the Setup Defaults window.
window.
and change the settings as indicated below (all other settings keep as is):
•
Set the correct Time and Date if incorrect
•
Select Integrated I/O Port Settings and press Enter
If no external modem is connected:
– select Serial Ports and press Enter
— select Serial Port B
— change to Disabled
— press Enter twice
— press ESC twice to return to the Configuration Menu
If an external modem is installed:
– select Serial Ports and press Enter
— select Serial Port B
— change to Enabled
— 2F8
— IRQ3
— press ESC twice to return to the Configuration Menu
•
Select PCI Device Settings and press Enter
– select PCI IRQ Locking and press Enter
– Tab down to select Individual IRQ Locking and press Enter and make the
following changes:
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
PCI Slot 6
Embedded LVD SCSI A
Embedded LVD SCSI B
Embedded LAN
–
Press ESC three times to return to the Configuration Menu
Change to [Disabled]
Change to [Disabled]
Change to [11]
Change to [10]
Change to [3] (if external modem is
connected, set this to [Disabled])
Change to [Disabled]
Change to [Disabled]
Change to [Disabled]
Change to [5]