Table of Contents
Advertisement
Interconnecting the System
D510 System
Mouse
Keyboard
Note
For Single Display systems, the Main Display is plugged into the 9-pin Main Display
connector on the rear of the D510 PC.
For Dual Display systems, a Dual Video Card and Y-Cable are required. The Y-Cable plugs
into the 9-pin Display connector on the Dual Video Card. See Figure 5-20. The Main Display
then plugs into the Y-Cable connector labeled 1 and the Second Display plugs into the Y-
Cable connector labeled 2. The rear panel Main Display connector is not used.
Caution
Single Display systems must not have a Dual Video Card installed. The Main Display
connector must be used.
5-20
Hardware Installation
Printer
Clinical Network
Main Display
(Single Display)
UPS
Figure 5-20 Plug Connections for D510 PC Workstation
To Dual Video
Card Connector
-
Speaker
Hospital LAN NIC Card
(Optional)
*
Y-Cable
(Dual Display)
*
*
See Note
4-Channel
Recorder
(Optional)
-
SDN
2-Channel
Recorder Rack
(2) To Second Display
(1) To Main Display
Advertisement
Table of Contents
Troubleshooting
