Philips M3150B Installation And Service Manual page 253

Field Description
Monitoring Monitoring mode of the Clinical Unit, either Fixed or Flex
Buttons to the right of the field are for adding, editing, and removing Devices from the list.
Button Description
New Adds a new Information Center or Client on the Network to the Server. Clicking New brings up the
Add to network domain window
Fields in the Add new device to this domain window are:
• Model # - Selects the Device model to be added - M3155 Information Center or M3151
• Host Name - Enter the name assigned to the Device when it was installed. The Host Name of a
• Device Name - Enter a name for the Device. Generally, the Host Name and Device Name are the
Note If the number of Information Centers selected on the Purchased Options and Support
Information have already been installed, then adding a new Information Center is not
allowed.
Devices Names are sensitive to upper and lower case.
Note
When Host Name is entered in this window, it will appear as read-only in Purchased
Options and Support Information of the Device being added.
Host Name and Device Name must be identical to these names in the Purchased Options
and Support Information window for the Server to identify it.
Field
Location
Associations
Central Station
Connected to SCC
Belongs to unit
2-Channel Recorder/
Rack
4-Channel Recorder
Information Center Client. Clicking on the arrow to the right of the box lists the model numbers.
Click on the model number to be added to select it.
device can be found in the Network application of its Control Panel. It is the Computer Name
in the Identification window.
same and the same name will be entered in both boxes
Description
The hospital location for the Device being added. As indicated, entering this
(Optional).
information is optional.
Specifies the Clinical Unit and SCC (for SDN systems) for the Device being added
Available Central Station numbers for the selected SCC. A SCC can support up to 6 Central
Stations, and each must have a unique Central Station #. This field is only applicable when a
SCC has been selected. Clicking on the down arrow to the right brings up a list of available
central station numbers. CS#s that have already been assigned are disabled for selection.
List of SCCs for assigning to the Device. Click on (highlight) the SCC that the Device being
added is connected to. Not all Information Centers have an SCC. If no SDN beds are to be
monitored by an Information Center, this field is grayed out.
Displays the list of Clinical Units for assigning to the Device. Click on (highlight) the Clinical
Unit that the Device being added is associated with.
Enable this field if a 2 Channel recorder/rack is connected to this device.
Enable this field if a 4 Channel recorder is connected to this device.
Software Installation & Configuration
Configuration
6-27