Table of Contents
Advertisement
Applications Library
Real Time
Applications
Control Applications
Applications Library software does the following:
Real Time Applications control the display of real time patient data from bedside
and telemetry monitors on the Main Screen and Patient Window, shown in Figure
3-11.
The Main Screen application controls the display of real time physiological
and alarm information for each monitored patient on the Main Screen. This
information is obtained from the Physio Data Server and is continuously
displayed in a Patient Sector of the Main Screen. As patient data or alarm
conditions change, this information is received by the Physio Data Server from
the SDN/LAN and passed on to the Main Screen.
The Patient Window application controls the display of real time
physiological and alarm information in the Patient Window. It has access to
more real time patient data from the Physio Data Server than are available for
the Main Screen application. As for the Main Screen, patient data and alarm
information is continuously updated in the Patient Window as it changes.
Figure 3-11 Main Screen/Patient Window Applications
Control Applications provide a range of functionality that allows the clinician to
adjust patient monitoring behavior on a unit wide basis, as well as overrides for
individual patients.
Unit Settings: Control Applications for unit settings provide functionality
for the clinical unit setting buttons in the Unit Settings window accessed from
IntelliVue Information Center Application Software
Software Description
3-13
Advertisement
Table of Contents
Troubleshooting
