Philips M3150B Installation And Service Manual page 128

Specifications
Caution To minimize potential problems, the modem phone line cable should be disconnected
when not in use.
Note The Windows Catalogs are replacing the Hardware Compatibility List (HCL).
Step 1. Go to the Windows Catalogs URL: www.microsoft.com/whdc/hcl/default.mspx.
Step 2. Click on the appropriate link:
•
•
Step 3. Navigate to the find external analog modems.
Step 4. Select from the products with the strongest compatibility rating(s) (i.e. has all of the
Specification
International Telecommunications
Union (ITU) standardization
Physical
Interrupt Request
Base I/O Address
Serial port FIFO enabled
Port Speed
Data bits
Stop bits
Use error control
Use flow control
Modulation type
Record a log file
2-54
Hardware Description
Windows XP devices: Windows Catalog link.
Windows 2000 Server devices: Windows Server Catalog link.
Windows Logo requirements and there is a driver available for download.)
Table 2-8. Requirements for an External Modem
Exact model has a Logo or Compatible
listing for use with Windows 2000 Server
or XP Professional
e.g. V.34, V.90
Serial B
Logical
Parity
Yes, Compress data
Yes, Hardware (RTS/CTS)
Standard
External modem-cable connector
Type Female, 9-pin, D-Sub, RS-232C
Pin 1 DCD (Data Carrier Detect)
Value
COM 2
IRQ 3
2F8
Yes
115200
8
None
1
No
Comments
Follow the modem manufacturer's
installation procedures for Windows 2000
Server or XP Professional
Enable in BIOS Setup
OS's modem preference
Default IRQ. Set to Available in BIOS
Setup
Default hex address
Default setting
Typical value
Default value
Default setting
Default value