Table of Contents
Advertisement
Note
IntelliVue Information Center Demo Mode Software Installation
Your systems host name must be set to DEMO to use the configuration
provided. This archive file uses friendly bed labels in a 16 patient 8x2 format
(see sample screen).
Bed Label
TeleB1 - TeleB3
EASIB1 - EASIB3
Alarm1 - Alarm2
Bed4 - Bed7
Bed11,12,14
All systems have 24 hours of data for retrospective review applications. The
two patient sectors (Archive 1 & 2) also have alarm review data.
To change the number of beds being displayed in Demo Mode it is
recommended not to change the number of patients! This will erase all the
data and settings. Use the Bed Config Setup Sector Layout - go to Bed Config
and change the number of patients; e.g., from 16 to 12 (see sample screen
below).
To run the Demo Mode simulator files, go to the Desktop window and double-
click on the RunDemo icon which has been installed on the screen.
Type of Bed/Simulator
Telemetry
EASI Telemetry
SDN in Alarm with Alarm Review Data
SDN
SDN
Demo Mode Installation Procedure
F-3
Advertisement
Table of Contents
Troubleshooting
