Setup Monitor Label Procedure; Setup Switch Procedure - Philips M3150B Installation And Service Manual

Setup Monitor Step 1. Assign M3/M4/IntelliVue Monitor Labels to Bed Labels as follows:
Label Procedure
•
•
•
•
•
•
Step 2. Repeat Step 8 for each Monitor Label and Bed Label in the Equipment Setup
Note The Monitor Label must also be entered in the Patient Monitor.
•
Setup Switch Step 1. Assign M3/M4/IntelliVue Monitoring Equipment on Switch Port Numbers to
Procedure
•
•
•
•
•
Step 2. Repeat Step 10 for each Port # and Switch in the list.
When all patient monitors have been assigned:
Click Next> to save changes and advance to the next window.
Click on (highlight) the first Monitor Labels icon in the left column of the
Equipment Setup for Monitor Labels field.
Click on (highlight) the first Label # in the Label # column to activate it for assigning
a Bed Label.
Click Setup Monitor to bring up the Map Monitor to Monitor label #X window
for that Label #.
Click on (select) the first Monitor Label in the Label equipment list.
Click on (highlight) the Bed Label to be assigned to that patient monitor from the
Located at bed list.
Click OK to enter that M3/M4/IntelliVue Monitor Label and Bed Label assignment in
the Equipment Setup for Monitor Labels field.
for Monitor Labels field.
See the M3/M4 or IntelliVue Patient Monitor User's Guide for more details.
Bed Labels as follows:
Click on (highlight) the desired Switch in the left column of the Equipment Setup
for Selected Switch field.
Click on (highlight) the desired Port in the Port column to activate it for assigning a
patient monitor.
Click Setup Monitor to bring up the Map Monitor to Port #X window for that Port
#.
Click on (highlight) the Bed Label in the Located at bed: list that the M3/M4/
IntelliVue with that Monitor Label will be assigned.
Click OK to enter that M3/M4/IntelliVue Monitor Label and Bed Label assignment in
the Equipment Setup for Selected Switch.
Software Installation & Configuration
Configuration
6-45