Table of Contents
Advertisement
Touch Display
The touch display comes with a stylus that can be mounted to the display.
Stylus and
Step 1. Attach the stylus cord to the display as illustrated in Figure 5-27.
Holder Mount
Video Cable Connector
Step 2. Clean the area below the Control buttons on the right hand side of the display with
Figure 5-27 Stylus Cord connection
alcohol. Wait for the surface to dry, and then remove the backing from the stylus holder
and adhere it to the display (ensuring the wide end of the holder is facing up).
Interconnecting the System
5-25
Hardware Installation
Advertisement
Table of Contents
Troubleshooting
