Table of Contents
Advertisement
Interconnecting the System
Remote Slave
Display Wiring
Notes
Main Display
f/f Adapter
15 Pin/5 BNC
Adapter Cable
2-Way
Video
Splitter
15 Pin/5 BNC
Adapter Cable
5-28
Hardware Installation
If the slave display is located remotely from the processing unit, extended length, coax
cabling may be required. This is described in the Installation Note that ships with the
option. The wiring diagram for this installation is shown in Figure 5-29.
The maximum length coax cable supported is 90 m (300 ft.).
Image quality diminishes somewhat with increasing cable length.
Coax cable lengths must be cut from the same spool of cable and be equal within + 1 m (3 ft.)
Plenum Coax: 78599AI - #P35
5 M BNC Conn.: 78599AI - #J89
Non-Plenum Coax: 78599AI - #C62,C63
5 M BNC Conn.: 78599AI - #J87
5 BNC/5 BNC
Adapter Cable
Figure 5-29 Remote Slave Display Wiring Diagram
Remote Slave Display
15 Pin/5 BNC
Adapter Cable
f/f Adapter
Dual-Gang Video
Wall Plate &
BNC Connectors
Display
Video
Cable
Advertisement
Table of Contents
Troubleshooting
