Table of Contents
Advertisement
When Date and Time Setup is opened directly from the Configuration menu, Store
Settings must be clicked for the settings to be stored.
Procedure The procedure for setting time and date in the Time and Date Setup window is the
following:
Step 1. Set date and time to present values by clicking in the boxes of the Date: and Time:
Step 2. Set the time zone of the Information Center location in the Time Zone field by
Step 3. If the Information Center location uses daylight savings time:
•
Step 4. If Date and Time Setup was activated directly from the Configuration menu:
•
•
•
If Date and Time Setup was activated from Config. Wizard,
•
Note
For Information Centers without a Database Server, the next window is Archive.
fields and using up/down arrows to change the values.
clicking the pull down button on the right of the field and then clicking on the
appropriate Time Zone.
Click in the Automatically Adjust For Daylight Savings Time box. Time will
then change automatically to the correct value when daylight savings time changes.
Click on Store Settings. A Time Set App box will appear asking
Are you sure? Please Confirm.
Double check your settings. When they are correct,
Click Yes and the date and time will be set on the Information Center and all other
devices on the network.
Click Next> to advance to the !Config Wizard Print All window.
Software Installation & Configuration
Configuration
6-57
Advertisement
Table of Contents
Troubleshooting
