Troubleshooting
Step 5. Select Settings. This opens the Controller Settings window of Figure 7-34.
Step 6. Select More Information to view the window shown in Figure 7-35
Proper configuration settings for the Raid disk drive are shown in Figure 7-35. If this is not
the configuration settings, the RAID configuration may have to be restored. This procedure
is described in Restoring RAID Configurations on page 7-140.
NetServer LC2000 - NetRaid Assistant Utility
This application provides direct access to status and configuration settings of the Server's
RAID software.
7-68
Maintenance, Troubleshooting, and Repair
Figure 7-34 Controller Settings
Figure 7-35 Array Information