Analog Input Action Assignment; Factory Default Analog Input Configuration - HindlePower ATevo Series Operating/Service Instructions Manual

12.6.7 Analog Input Action Assignment

The Analog Input action assignment links the Analog Input alarm to
a charger control. Examples of a charger control include charger
shutdown or float/equalize mode control. ATevo will execute the
charger control when the Analog Input alarm is in the active state.
To assign a control to an Analog Input:
MENU > AUX INPUTS > 'Analog Input Configuration' > select input
(as shown in Section 12.6.1) > 'Action:' > select action

12.6.8 Factory Default Analog Input Configuration

Unless otherwise specified, the ATevo Auxiliary I/O Board (A4) will
ship from the factory with the following Analog Input Configuration:
Factory Default Analog Input Configuration
Input Name
#1 AN1-1
#2 AN1-2
#3 AN1-3
#4 AN1-4
12 Auxiliary Inputs/Outputs
Units 0V=:
V 0.0V
V 0.0V
V 0.0V
V 0.0V
ATevo
10V=: Trigger
10.0V off
10.0V off
10.0V off
10.0V off
Action
none
none
none
none
119