Changing Charge Mode - HindlePower ATevo Series Operating/Service Instructions Manual

5.1.2 Changing Charge Mode

ATevo has two (2) output voltage modes that are set with the
CHARGE MODE button:
• FLOAT - for normal battery charging
• EQUALIZE - to balance voltage among battery cells. Before
using, consult manufacturer's battery data sheets.
Present charge mode is displayed at the top left of the HOME screen:
'Float' appears when charger is in FLOAT mode, and 'Equalize'
appears when it is in EQUALIZE mode.
To change Charge Mode:
CHARGE MODE > other displayed choice
When ATevo is in EQUALIZE mode, the charger will:
• Ramp up to the EQUALIZE VOLTAGE set point.
• Start the EQUALIZE TIMER.
• Alternate display between showing the HOME screen and a
screen that shows the EQUALIZE TIME REMAINING.
ATevo will remain in EQUALIZE mode until either the EQUALIZE TIMER
expires or the charge mode is manually switched back to FLOAT.
ATevo
5 Basic Operation
53