HindlePower ATevo Series Operating/Service Instructions Manual page 9

SAFETY INSTRUCTIONS
PLEASE READ AND FOLLOW TO AVOID
SERIOUS INJURY OR DEATH
1. Before using ATevo, read all instructions and cautionary
markings on: a) this equipment, b) battery, and c) any other
equipment to be used in conjunction with ATevo
2. Do not use ATevo for ANY purpose not described in this manual.
3. Do not install ATevo outdoors, or in wet or damp locations,
unless specifically equipped for that environment.
4. Do not operate ATevo with any power source that does not
match the specified ac and dc voltage ratings. Refer to the data
nameplate decal affixed to the outside panel for operational
requirements.
5. Turn OFF ATevo before connecting or disconnecting the battery
to avoid electrical shock hazards, arcing, burning, and/or
equipment damage.
6. Do not operate ATevo with the safety shield or any other
supplied guards removed or improperly installed.
7. Do not operate ATevo if it has been damaged in any way. Refer
to qualified service personnel.
8. De-energize and lock out all ac and dc power sources to ATevo
before servicing.
9. Do not disassemble ATevo. Only qualified service personnel
should attempt repairs. Incorrect reassembly could result in
explosion, electrical shock or fire.
10. Remove all jewelry, watches, rings, etc. before proceeding with
installation or servicing to avoid electrical shock hazards.
1. This manual contains important safety and operating
instructions, and therefore should be filed for easy access.
2. Maintain at least 6in / 152mm of free air on all vented surfaces
for cooling. Allow sufficient clearance to open the front panel
for servicing.
ATevo
ix