Receiving & Mounting; Storing Atevo; Receiving Atevo; Unpacking And Inspecting Atevo - HindlePower ATevo Series Operating/Service Instructions Manual

1 Receiving & Mounting

1.1 Storing ATevo

If you store ATevo for more than a few days before installation, store
it in its original shipping container, in a temperature-controlled,
dry climate. Ambient temperatures of 0 to 122 °F / -18 to 50 °C are
acceptable. Storage should not exceed two (2) years due to limited
shelf life of dc filter capacitors when they are not in service.

1.2 Receiving ATevo

The manufacturer does not assume any liability for damage during
transportation or handling. Therefore, upon receipt of ATevo (or
related products) immediately unpack, inspect for damage or
shortage (per Section 1.3), and report issues found (per Section 1.4).

1.3 Unpacking and Inspecting ATevo

Carefully remove all shipping materials from ATevo, and save until
you are sure ATevo is undamaged. Remove ATevo from shipping
pallet. Inspect for possible damage, using checklist below. If
damage found, see Section 1.4 for proper reporting.

1.3.1 Inspection Checklist

□ Enclosure exterior and interior are not marred or dented.
□ No visible damage to exterior or interior components.
□ Internal components are secure.
□ Printed circuit boards are firmly seated on their standoffs.
□ Hardware is tight.
□ Wire terminations are secure.
□ User's Manual is included.
□ Includes all items on packing list.

1.4 Reporting Damage or Shortage

If damage or shortage is found, notify the delivery person and make
notation on all copies of carrier's receipt before signing. If such is
discovered after delivery, notify carrier immediately and request an
inspection. Should the products require an inspection by (or return
to) the manufacturer, please contact your sales representative for
further instructions.
2
ATevo