HindlePower ATevo Series Operating/Service Instructions Manual page 85

• Move shorting block on jumper to 'PRGM' position.
• Insert ATevo-compatible SD Memory Card with program files into
socket.
• Press RESET button (SW13) located 3in / 76mm below RE-FLASH
JUMPER.
mainapp.bin
• If
appear.
• Select 'Yes' if desired. A message will confirm that the Main
Application program has updated.
• If the SD Memory Card contains the
be prompted to upgrade the Display Application program.
• Select 'Yes' if desired, and a message will confirm the update.
• The charger will reset and prompt you to upgrade the Main
Application program again.
• Move the RE-FLASH JUMPER shorting block back to the 'NORM',
normal operating position and press RESET.
• The ATevo will re-boot.
• When it restarts, it will be running the new installed program(s).
is stored on the card, the message below will
bruno.bin
ATevo
6 Advanced Operation
file, you will
69