Setting Float Voltage; Setting Equalize Voltage - HindlePower ATevo Series Operating/Service Instructions Manual

4 Startup & Configuration
NOTICE
the Main Menu by selecting the BASIC SETTINGS icon.
While adjusting settings, if the user does not press a front panel key
for ten (10) minutes, Edit Mode ends automatically. In this case,
ATevo does not save adjustments to any setting, not previously saved
with the EDIT/ENTER key.

4.2.2 Setting Float Voltage

From the HOME Screen, press EDIT/ENTER. The Edit Float Voltage
Screen appears as evident by 'Float Voltage' at top of the display. Its
present set point is displayed. To set this parameter follow the steps
in Section 4.2.1.

4.2.3 Setting Equalize Voltage

From the HOME screen, press EDIT/ENTER twice until the Edit
Equalize Voltage Screen is visible ('Equalize Voltage' on top of
display). To set this parameter follow the steps in Section 4.2.1.
38
The Basic ATevo Set Point mode can also be entered from
ATevo