Upgrading Firmware Via Sd Memory Card - HindlePower ATevo Series Operating/Service Instructions Manual

6 Advanced Operation
MENU > SAVE:RESET SETTINGS >'Restore from Memory Card'
The screen will briefly confirm the file was copied successfully. The
charger will restart with the restored configuration settings.

6.5.4 Upgrading Firmware via SD Memory Card

A powerful ATevo charger feature is that the Main Control Board
(A1) firmware (or software) can be easily updated in the field without
uninstalling the charger or any boards. The process takes minutes.
The first step in upgrading ATevo is to obtain the latest two (2)
program files from the supplier:
• mainapp.bin
• bruno.bin
These can be updated independently or at the same time.
Next, copy these files onto an SD Memory Card, using either a
Personal Computer (PC) with an SD Memory Card slot, or a USB to
SD Memory Card adapter. When the files are on the SD Memory
Card transfer them to ATevo.
• Open the ATevo front panel door, and locate the SD Memory
Card socket on the back of the Main Control Board (A1).
• Directly below the socket will be a 'RE-FLASH ENABLE JUMPER'.
68
= Main Control Application program
= Display Application program
ATevo