Setting Equalize Timer; Setting High Dc Alarm Voltage; Setting Low Dc Alarm Voltage - HindlePower ATevo Series Operating/Service Instructions Manual

4.2.4 Setting Equalize Timer

From the HOME screen, press EDIT/ENTER three (3) times until the
Edit Equalize Timer Screen, 'Eqlz. Time(hours)', is visible on top of
display. To set this parameter follow the steps in Section 4.2.1.

4.2.5 Setting High DC Alarm Voltage

From the HOME screen, press EDIT/ENTER four (4) times until the
Edit High DC Alarm Voltage Screen, 'High DC Alarm (V)', is visible on
top of display. To set this parameter follow the steps in Section 4.2.1.

4.2.6 Setting Low DC Alarm Voltage

From the HOME screen, press EDIT/ENTER five (5) times until the Edit
Low DC Alarm Voltage Screen, 'Low DC Alarm (V)', is visible on top
of display. To set this parameter follow the steps in Section 4.2.1.
4 Startup & Configuration
ATevo
39