Analog Input Configuration; Analog Input Name Assignment - HindlePower ATevo Series Operating/Service Instructions Manual

12 Auxiliary Inputs/Outputs

12.6.1 Analog Input Configuration

To make changes to parameters for any Analog Input on the Auxiliary
I/O Board:
• MENU > AUX INPUTS > 'Analog Input Configuration' > select
input > select parameter as shown in Section 12.6.2 through
12.6.7

12.6.2 Analog Input Name Assignment

To change the name of an Analog Input on the Auxiliary I/O Board:
• MENU > AUX INPUTS > 'Analog Input Configuration' > select
input (as shown in Section 12.6.1) > 'Name:' > set characters
desired
114
ATevo