HindlePower ATevo Series Operating/Service Instructions Manual page 134

12 Auxiliary Inputs/Outputs
• This number may be in primary values based on the scaling
settings for the associated Analog Input. The threshold set point
configured will be scaled by the associated Analog Input scaling.
To adjust the high level threshold set point for a trigger for an Analog
Input alarm:
MENU > AUX INPUTS > 'Analog Input Configuration' > select input
(as shown in Section 12.6.1) > 'Trigger:' >'High threshold:' > set digits.
• This number may be in primary values based on the scaling
settings for the associated Analog Input. The threshold set point
configured will be scaled by the associated Analog Input scaling.
118
ATevo