Configuring System Settings; How To Configure System Settings; Setting System Time - HindlePower ATevo Series Operating/Service Instructions Manual

4.4 Configuring System Settings

This section details configuration of the ATevo system parameters,
including date, time, and LCD controls (brightness, contrast, etc.).

4.4.1 How to Configure System Settings

To enter System Settings mode, select MENU > SYSTEM SETTINGS.
ATevo will display a scrollable page of parameters.
To change a parameter, do the following:
• Navigate using UP and DOWN, and select it with EDIT/ENTER.
• Press LEFT and RIGHT to navigate to the digit to be modified
• Press UP and DOWN to change setting value.
• Once desired setting is displayed, press EDIT/ENTER to store it.

4.4.2 Setting System Time

To access and change the System Time follow the steps in Section
4.4.1.
NOTICE
ATevo uses a 24-hour clock (e.g. 2:30 PM is 14:30).
ATevo
4 Startup & Configuration
45