Security Icon; System Settings Icon; System Information Icon; Alarms Button - HindlePower ATevo Series Operating/Service Instructions Manual

6.1.10 Security Icon

6.1.11 System Settings Icon

6.1.12 System Information Icon

MAIN
MAIN
DISPLAY
DISPLAY

6.2 Alarms Button

( ALARM RESET )
( ALARM RESET )
indicator on the front panel. Alarms without a dedicated LED
indicator will light the COMMON alarm LED on the front panel.

6.3 Health Button

( LAMP TEST )
( LAMP TEST )
Test results are logged with a time and date stamp. The health test
can be aborted at any point by pressing the ESC button. See Section
8 for instructions on how to run the Hindle Health System test.
This icon opens a list of ATevo password and login
functions. See Section 6.4 for instructions.
This icon opens configurable options for System
Settings such as time, date, and display backlight
intensity. See Section 4.4 for instructions.
This icon allows you to scroll through a screen of
System Information.
The ALARMS button shows the Active Alarm List - four
(4) alarms per page. If more than four alarms are
ALARMS
active, use UP and DOWN arrows to scroll through
ALARMS
the list.
Not all ATevo alarms have a dedicated LED alarm
The HEALTH button initiates the Hindle Health
System. The user is prompted through a series of
tests that verify the ATevo is working properly. The
Hindle Health System will verify set points, test alarms
and relays, verify calibration, and test hardware.
6 Advanced Operation
AC ON
AC ON
HIGH DC VOLTAGE
HIGH DC VOLTAGE
LOW DC VOLTAGE
LOW DC VOLTAGE
DC OUTPUT FAILURE
DC OUTPUT FAILURE
AC INPUT FAILURE
AC INPUT FAILURE
POSITIVE (+) GROUND
POSITIVE (+) GROUND
NEGATIVE (-) GROUND
NEGATIVE (-) GROUND
COMMON ALARM
COMMON ALARM
PRESS BUTTON TO PERFORM
A DIAGNOSTIC HEALTH CHECK
PRESS BUTTON TO PERFORM
A DIAGNOSTIC HEALTH CHECK
ATevo
ACTION
REQUIRED
ACTION
SCAN TO VIEW :
SCAN TO VIEW :
MANUAL
MANUAL
STANDARD
DRAWINGS
STANDARD
DRAWINGS
SERVICE
INSTRUCTIONS
SERVICE
INSTRUCTIONS
ATSERIES.NET
ATSERIES.NET
61
IMMEDIATE
ACTION
IMMEDIATE