Remote Voltage Sense; Wiring Atevo Common Alarm - HindlePower ATevo Series Operating/Service Instructions Manual

2 Wiring

2.6 Remote Voltage Sense

You can wire ATevo to regulate output voltage at the battery
terminals instead of at the battery charger dc output terminals
(CB2+/-). See Section 11 for information and wiring instructions.

2.7 Wiring ATevo Common Alarm

ATevo Main Control Board (A1) is equipped with a 'summary'
Common Alarm relay. This relay contact transfers when any one (1)
or more of the standard ATevo alarm(s) become active. One (1) set
of form-C alarm contacts is provided, and are accessible via terminal
block (A1-TB6) on the Main Control Board. Refer to figure below.
20
ATevo