Software Configuration For Binary Inputs; Binary Input Configuration - HindlePower ATevo Series Operating/Service Instructions Manual

12 Auxiliary Inputs/Outputs

12.5 Software Configuration for Binary Inputs

The Auxiliary I/O Board (A4) Binary Inputs are used to monitor,
alarm, and/or report on the status of any external switch or contact.
Each input can be independently configured to be active high or low,
activate an alarm, and/or activate a control. ATevo assigns each
input a unique generic name that may be replaced by the user.
NOTICE
In the following subsections, Auxiliary I/O Board Binary Inputs default
names are specified by board number (see Section 12.3.1), and Binary
Input number on the associated board. For example: 'Aux 1 input B2'
specifies Binary Input #2 on Auxiliary I/O Board #1.

12.5.1 Binary Input Configuration

To make changes to parameters for any Binary Input on the Auxiliary
I/O Board:
MENU > AUX INPUTS > 'Binary Input Configuration' > select input
from options > select parameter as shown in Section 12.5.2 through
12.5.5
110
Software Configuration Naming
ATevo