3 Controls & Navigation
3.3.3 Navigation Conventions in this Manual
In the previous two (2) pages, a sequence of commands executed
a sequence of screens to display. That example was provided to
illustrate the use of the UP, DOWN, LEFT, RIGHT arrow buttons, and
the EDIT/ENTER button for navigation.
The full command sequence shown was:
1. Press MENU to open the Main Menu screen.
2. Press DOWN to select EVENT LOGS.
3. Press EDIT/ENTER to open 'Event Logs' screen.
4. Press UP OR DOWN arrows to navigate to 'View event log'.
5. Press EDIT/ENTER to open an event log screen.
Using a full command sequence with every command in this manual
would lead to needless repetition and tedious document length. As
the above example illustrates, most of the repetition comes from
listing every navigation button push.
ATevo uses a simple, nearly universal navigation system that is used
by most tv remote controls. It is not necessary to list the following
navigation button pushes: UP, DOWN, RIGHT, LEFT or EDIT/ENTER.
This convention results in a streamlined sequence of ATevo-specific
commands.
For our example, this is:
1. Press MENU to open the Main Menu screen.
2. Execute the EVENT LOGS command on the Main Menu.
3. Execute the 'View event log' command on the Events Logs screen.
29
ATevo