Installing Serial Communications Adapter (A13); Configuring Serial Communications Hardware - HindlePower ATevo Series Operating/Service Instructions Manual

13.3.1 Installing Serial Communications Adapter (A13)

Refer to the supplementary ATevo Communications Manual
(JA0102-54) for more information and how to install and wire the
Serial Communications Adapter.

13.3.2 Configuring Serial Communications Hardware

The jumpers on the Serial Communications Adapter (A13) must be
configured to operate in 2-WIRE RS-485 mode.
2-Wire RS-485 Settings
Jumper(s)
P2
P3
P4, P5
P6, P7
Label Setting
RXCTRL TXE
MEDIA 485
485-TERM OFF
#WIRES 2W
ATevo
13 Forced Load Sharing
121