8.2.3 Hindle Health LED Indicators
Hindle Health LED Indicators are at the bottom of the front panel
overlay.
• GREEN LED, when lit, indicates ATevo is healthy.
• RED LED, when lit, indicates ATevo has an issue. Urgency of
action required depends upon if it is:
» Blinking - Immediately replace Main Ctrl Board (A1). There
is a critical failure of the microprocessor driving the display
and front panel controls. LCD display may be blank,
frozen, or displaying corrupted data. Core microprocessor
responsible for charging the battery may still be operational.
» Solid - ATevo requires attention, but the condition is not
critical. In most cases, LCD display will operate and be able
to report the issue and give instructions on how to resolve
it. RED LED is illuminated when ATevo detects any error
condition, when any alarm is active, or when the Hindle
Health System detects any non-normal operating condition.
8.3 Hindle Health System - Screens
Hindle Health System screens allow the user to test ATevo to ensure
it is operating correctly. Screens permit the user to simulate alarm
conditions, check set points and parameters, exercise relays, and
verify indicators are working as designed.
Step-by-step guidance is provided through the testing process. To
start the Hindle Health System, press the Hindle Health Button.
8.3.1 Introduction and Warning Screens
The first few health screens inform the user of how to navigate
through the testing process and how to track progress. The next
screens warn about any hazardous conditions and identify any tools
required. To exit testing at any point, press ESC.
8 Hindle Health System
ATevo
83