4 Startup & Configuration
To disable an alarm in the COMMON ALARM list:
MENU > COMMON ALARM > select alarm to change status.
If an '[X]' appears to the left of the alarm, it will activate the
COMMON ALARM. If '[ ]' appears, it will not activate the COMMON
ALARM.
4.7 Configuring Serial Communications Adapter
ATevo can support up to three (3) optional Serial Adapter modules.
Each Serial Adapter module can:
• support SCADA protocols (DNP3 or Modbus)
• be used as a standard communications interface to connect to
external serial devices
• be used in various applications (such as Forced Load Sharing)
Instructions on how to configure Serial Communications Adapters
are found in the ATevo Communications Manual (JA0102-54).
4.8 Configuring Ethernet Adapter
ATevo can support an optional Ethernet Adapter (A22) module.
The Ethernet Adapter module:
• can support SCADA protocols (DNP3 or Modbus)
• will support an ATevo web page interface (future)
• will permit a file transfer mechanism to upload/download files
for firmware upgrade and log file transfer (future)
Instructions on how to configure the Ethernet Adapter are found in
the ATevo Communications Manual (JA0102-54).
50
ATevo