Logging In To A Password Authorization Level; Logging Out - HindlePower ATevo Series Operating/Service Instructions Manual

6 Advanced Operation

6.4.5 Logging In to a Password Authorization Level

If you attempt to access a feature or change a parameter that is
configured at a higher privilege level than DEFAULT ACCESS (or the
present level), ATevo will prevent the action. You will need to log in at
the configured privilege level (or higher) to proceed.
To LOG IN to a privilege level, select 'LOG IN', select the level you
wish to access, and enter the password.
If the entry is correct, you will be able to access all features at the
privilege level. However, if no buttons are pushed for more than ten
minutes, ATevo will switch back to DEFAULT ACCESS level.

6.4.6 Logging Out

You must log out after completing operations at a higher privilege
level, or protected operations will be available for anyone to access.
To LOG OUT of the present privilege level, select 'LOG OUT'. The user
will receive a confirmation message and return to DEFAULT ACCESS
privilege level.
NOTICE
above DEFAULT ACCESS after ten (10) minutes of inactivity.
64
ATevo automatically logs out of any authorization level
ATevo