Wiring Binary Input Connections - HindlePower ATevo Series Operating/Service Instructions Manual

12 Auxiliary Inputs/Outputs

12.2.3 Wiring Binary Input Connections

Connections to Binary Inputs are made through an 8-pos terminal
block (A4-TB1). The terminal block is removable to simplify wiring.
The terminal connections are labeled along the edge of the Auxiliary
I/O Board next to terminal block (A4-TB1). Each Binary Input is
optically isolated and has a polarized pair of terminals. Observe the
pos(+) and neg(-) designators when wiring the terminal block.
102
ATevo