Setting Ac Ripple Alarm; Setting Positive (+) Ground Fault Sensitivity Level; Setting Negative (-) Ground Fault Sensitivity Level - HindlePower ATevo Series Operating/Service Instructions Manual

4.3.6 Setting Ripple Alarm
To access and change the set point for the AC Ripple Alarm
(discussed in Section 7.5.4), follow the steps in Section 4.3.1.

4.3.7 Setting Positive (+) Ground Fault Sensitivity Level

To access and change the Positive Ground Fault Sensitivity set point
for the Positive (+) Ground Fault Alarm (discussed in Section 7.3),
follow the steps in Section 4.3.1.

4.3.8 Setting Negative (-) Ground Fault Sensitivity Level

To access and change the Negative Ground Fault Sensitivity set
point, for the Negative (-) Ground Fault Alarm (discussed in Section
7.3), follow the steps in Section 4.3.1.
4 Startup & Configuration
ATevo
43