Setting High Level Detect; Setting End Of Discharge (Eod) Alarm; Setting Low Voltage Level Detect - HindlePower ATevo Series Operating/Service Instructions Manual

4 Startup & Configuration

4.3.3 Setting High Level Detect

To access and change the High Level Detect set point for the High
Level Detect feature (discussed in Section 5.4), follow the steps in
Section 4.3.1.

4.3.4 Setting End of Discharge (EOD) Alarm

To access and change the End of Discharge set point for the End
of Discharge Alarm (discussed in Section 7.5.3), follow the steps in
Section 4.3.1.

4.3.5 Setting Low Voltage Level Detect

To access and change the Low Level Detect set point for the Low
Level Detect feature (discussed in Section 5.3), follow the steps in
Section 4.3.1.
42
ATevo