Restoring The Balancing Device Using A Hydraulic Press Tool - ABB IRB 6650S Series Product Manual

4.5.4.3 Restoring the balancing device using a hydraulic press tool

Overview
This section details how to restore the balancing device and how to remove the
press tool from the device.
Press tool and hydraulic cylinder
The figure below shows the hydraulic cylinder mounted on the press tool.
The press tool includes two press devices that are used to different models of the
balancing device.
xx0200000174
A
B
C
D
E
Product manual - IRB 6650S
3HAC020993-001 Revision: Z
4.5.4.3 Restoring the balancing device using a hydraulic press tool
DANGER
There is a high tensioned spring inside the balancing device, incorrect handling
may cause injuries and damage property.
Press block
Hydraulic cylinder
Press device
Bolt, press device
Moving pin with marking
© Copyright 2004-2018 ABB. All rights reserved.
4 Repair
Continues on next page
317